Roller User Guide

I. Roller Engraving

Step 1: Connect the machine to a power source. Install the roller onto the machine and position it within the appropriate working range.

Step 2: Open the Raymoto app and connect to the machine. The roller status will now be green. Press the directional buttons on the roller to adjust the roller spacing to the appropriate position.

Step 3: Adjust the machine's lifting platform so that the height of the item being engraved remains 160 mm from the machine.

Step 4: Create a new file in the application, import the pattern to be engraved, set the engraving parameters, select Roller G1 in the processing mode, and disable the slide carriage mode.

Step 5: Enter the machining page, preview the machining position, and start machining once confirmed!

II. Carving in Car Mode

Step 1: Secure the machine and bracket to the back of the drum. Connect the machine's power supply and install the drum onto the machine.Adjust the roller to its maximum position.

Step2: Open the Raymoto app and connect to the machine. The roller status will now be green.

Step 3: Create a new file in the application, import the pattern to be engraved, set the engraving parameters, select Roller G1 in the processing mode, and enable the slide carriage mode.

Step 4: Enter the machining page, preview the machining position, and start machining once confirmed!