Air Purifier User Guide

Installation and User Guide for Air Purifier

When both devices are switched off:

1. Connect the engraving machine and smoke purifier via a smoke pipe(As shown in the figure).

2. Connect the engraving machine to the fume extractor using a Type-C data cable.

3.Connect the air purifier to a 24V DC, 2.5A power adapter, then turn on the power switch ③. 

Directions:

1).Press the power/mode button on the top of the air purifier to turn on the unit. Each press cycles through the modes: Speed 1 → Speed 2 → Speed 3 → Off.

2).The air purifier will automatically start and stop when it detects program operation.