Handheld/Offline Mode Guide

Handheld Mode

Step 1: Install the protective cover onto the main unit and connect the cable between the main unit and the cover. (Please ensure the exhaust system is operating properly to prevent smoke generated during engraving from affecting the engraving quality.)

Step 2: Connect the machine to the power supply, open the mobile app, pair the device via Bluetooth, and enable “Handheld Mode” in the settings menu.

Offline Mode

Step 3: Tap “Creation” to enter creation mode, add images or materials, set the required parameters, and save after confirming everything is correct.

Step 4: Click “My File”, select the file you want to engrave (the file needs to be saved in advance), choose the file and click Upload. Once the upload is complete, click on a blank area to continue.

Step 5: Press the preview button on the machine to preview the image's position and size. With the light preview active, press and hold the start button for three seconds. The machine will begin light engraving.

After the preview, press and hold the start button for 3 seconds to begin engraving.